Multichannel Systems MEA Switch USB - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
MEA Switch USB
MEA S4/2 and MEA S2/1
multi
channel
systems
*
Technical Specifications
Operating temperature 10 °C to 40 °C
Storage temperature 0 °C to 50 °C
Relative humidity 10 % to 85 %, non-condensing
Dimensions (W x D x H)
220 mm x 235 mm x 52 mm
Weight 1050 g
Supply voltage
± 6 V (min ± 5.7 V, max ± 12 V)
Supply current -2 mA to +38 mA
Number of input channels
2 x 64 (MEA Switch 2 to 1), 2 x 64 + 2 x 64 (MEA Switch 4 to 2)
Input voltage 5 V
Input impedance 33 k

Number of output channels
64 (MEA Switch 2 to 1), 2 x 64 (MEA Switch 4 to 2)
Output voltage 5 V
Output impedance 300
 paralleled by 1 nF (low pass)
Interface
USB 2.0 port
MEA_Switch USB program
Operating system
Microsoft Windows ® 7, Vista or XP;
English and German versions supported
Two versions are available, MEAS4/2 and MEAS2/1. Please note that you will need
an external power supply, for example a PS40W, for operating the USB MEA Switch.
Warning: The devices may only be used together with MEA amplifiers
from Multi Channel Systems MCS GmbH, and only for the specified purpose.
Damage of the devices and even fatal injuries can result from improper use.
Do not open the USB switch boxes and do not change hardware configuration
as it could lead to improper behavior of the system.