Multichannel Systems SC2x32 - Manual

SC2x32
Channel Layout
Use and Operation
The SC2x32 is a signal collector for up to two MPA32I preamplifiers, connected via 37-pin D-SUB connectors.
The 2 x 32 input channels are collected, and can be connected to the following amplifier via 68-pin MCS
high grade cable. If only one MPA32I is connected, please connect a termination plug to the unused input
to prevent it from picking up noise.
The SC2x32 includes a 0.08 Hz high pass filter for removing DC offsets.
67
68
65
66
63
64
61
62
59
60
1
10
9
8
7
6
5
4
3
2
68-pin MCS-standard output
Channel 1 - 32
Channel 33 - 64
19
37
18
36
17
35
16
34
15
33
1
24
5
23
4
22
3
21
2
20
19
37
18
36
17
35
16
34
15
33
1
24
5
23
4
22
3
21
2
20
Warning: The device may only be used together with (USB) ME-Systems
from Multi Channel Systems MCS GmbH, and only for the specified purpose.
Damage of the device and even fatal injuries can result from improper use.
Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.