Multichannel Systems ADPT-FM-32 - Manual

Multi Channel Systems
MCS GmbH
Aspenhaustrasse 21
72770 Reutlingen
Germany Fon +49-7121-9 09 25- 0
Fax +49-7121-9 09 25-11
[email protected]
www.multichannelsystems.com
© 2011 Multi Channel Systems MCS GmbH
Product information is subject to change
without notice.
ADPT-FM-32
FlexMEA36 Adapter for
32-Channel Miniature Preamplifiers MPA32I
MPA32I: The side with no screws is considered the top side of the MPA32I.
ADPT-FM-32: If the adapter ADPT-FM-32 is oriented as shown in the figure, the FlexMEA36
must be inserted with the contact pads facing downward. Open the white drawer of the adapter.
FlexMEA36: Insert the FlexMEA36 carefully into the drawer of the adapter.
Please use the plastic spacer to fix the FlexMEA36 in the drawer of the adapter ADPT-FM-32,
and to ensure the contact.
Plastic Spacer: Insert the plastic spacer carefully into the drawer of the adapter.
The plastic spacer should be placed in the opposite side of the contact pads of the FlexMEA36,
otherwise the connection will be interrupted.
Close the white drawer of the adapter ADPT-FM-32.
FlexMEA36
Plastic
Spacer
ADPT-FM-32
MPA32I
Connecting the FlexMEA36 via Adapter ADPT-FM-32 to the MPA32I.
If you like to use the FlexMEA36 together with the standard 32-channel miniature preamplifier MPA32I,
you need the ADPT-FM-32 adapter to connect the FlexMEA36 to the standard MPA32I.
There is no need for an adapter if you use the 32-channel miniature preamplifier MPA32I-Flex,
which is specified for FlexMEAs. Please read the MPA32I-Flex manual for more information.