DefenderWorx Mustang Automatic Gear Shifters - Manual (Page 5)

Defenderworx, Inc. 1120 N. Armando Street, Anaheim, CA 92806 714.630.9700 Tech
www.defenderworx.com E-mail: [email protected]
The clip featured in this image is the plug to the wiring that will allow you
to remove your shift knob from the factory shaft. It is a quick tug and it
will unplug from the base of the factory shifter’s shaft. You are now able
to remove the factory shift knob and start putting your console back
together.
Step 6: You now just need to reassemble the shift area back to stock
without the factory shift knob. Once you have it all in place, you can add
the Defenderworx base to the factory shaft. Line the bottom of the base
up with your factory plastic liner and tighten the set screws with your
allen wrench.