Asus KCMA-D8 - Manual (Page 31)

ASUS KCMA-D8 2-13
2. Place one retension module on the
screw stand.
3. Use the screw that comes with
the retension module to secure
the retension module to the
motherboard.
4. Repeat steps 2 to 3 to install the
other retension module to the
motherboard.
2.3.2 Installing the retension module base
You may need to install the retension module base on the motherboard before
installing a CPU heatsink and fan assembly.
To install the retension module base:
1. Locate the two screw stands beside
the CPU socket.