AEG 52840 - Manual (Page 15)

Select the Delay Start
Before you start the programme, if you wish to delay
the start, press the Delay Start button repeatedly, to select
the desired delay. The relevant light illuminates.
This button makes it possible to delay the starting of the
washing programme by 3, 6, and 9 hours.
You must select this option after you have set the
programme and before you press the Start/Pause button.
You can cancel the delay time at any moment, before you press the Start/Pause
button. If the Start/Pause button has already been pressed:
set the washing machine to PAUSE by pressing the Start/Pause button;
press the Delay Start button once, the light relevant to the selected delay goes
off;
press the Start/Pause button again to start the programme.
Important!
The selected delay can be changed only after selecting the washing programme
again.
The door will be locked throughout the delay time. If you need to open the
door, you must first set the washing machine to PAUSE by pressing the
Start/Pause button and then wait some minutes. After you have closed the
door, press the Start/Pause button again.
The Delay Start can not be selected with Drain programme .
Programme progress display
After having pressed the Start/Pause button, the
functioning
pilot lights comes on.
When the pilot light functioning comes on this
means that the machine is performing the washing
cycle.
When the programme has finished, the end pilot light comes on.
When the appliance is performing additional rinses the extra rinse pilot light
comes on.
15 Use
9h 6h 3h
FUNCTIONING
END
EXTRA RINSE
192999930.qxd 6/19/2008 1:35 PM Page 15