NetMedia iSwitchHD-CE - Manual (Page 2)

NM-iSwitchHD-CE
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
MAN-iSwitchHD-CE REV1009A
Setup Procedures:
1. Connect the 5V DC 1A power transformer to the iSwitchHD Power Input connector. Connect
the other end of the power transformer to an AC outlet.
2. Use an HDMI cable to connect the output of each source to one of the four iSwitchHD Inputs.
Use another HDMI cable to connect the iSwitchHD Output to the display device (Figure 1).
3. Start the display device. Start one or more source devices (the corresponding Input LED will
be ON). The last source started will automatically be connected to the display (the corre-
sponding Input LED will PULSE). If desired, press the Select Button to manually change to a
different source. Note: it may take minutes for some devices to start and a few seconds for the
iSwitchHD and the display device to properly detect the HDMI signal.
Figure 1 - Connecting the iSwitchHD-CE to power, a display, and various sources such as a Satellite Receiver, Blu-ray,
video game console, and computer.
NM-iSwitchHD-CE
Satellite Receiver
Power
Video Game
Console
Laptop Computer HDTV
Blu-ray Player