NetMedia POCLAMP-DI User Manual

Nm-poclamp, Power over coax camera, Features

Advertising
background image

NM-POCL

AMP

NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com

Power over Coax Camera

NM-POCLAMP

Indoor/Outdoor Weather Resistant

MAN-POCLAMP REV1002A

Elbow Bracket

Adjusts camera angle at base,

screw, and housing.

Camera Lens

Factory set - rotates in either

direction to adjust focus.

Camera Bracket

Slot indicates image bottom.

Base, Gasket & Screws

Mount to round 4” junction box.

F-Connector

Transmits both power and video

across a single coax.

Housing Cap

Provides access to camera.

Locking Ring

Secures elbow bracket to

base at desired position.

Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, PoC Video Encoder, F-Connector).
2. NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.

PoC Video Encoder

Built into camera - exchanges

power and video with Decoder for

One Wire Video™ on coax cable.

Housing

NM-POCLAMP-CI

Ivory

NM-POCLAMP-DI

Available in Ivory Color Only:

Color camera Day/Night Color Housing

Color

Day/Night Color

Power Input

Connects to 24V DC wall

transformer (included)

and AC outlet.

F-Connector

Connects to camera

F-Connector with a single

coax such as RG6.

RCA Video Out

Connects to viewing

device such as monitor,

DVR, TV, or modulator.

PoC Video Decoder (Included)

This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external

PoC Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple

cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security monitor or

television. To view the camera on a single standard television, use the TV’s composite RCA Video Input jack.

PoC Video Encoder built into camera
Includes PoC Video Decoder module
One Wire Video™ Installation
Uses one coax cable to camera
Excellent image quality
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
One year limited warranty

FEATURES

Camera Lens:

Image Sensor:

Resolution:

Field of View:

Min Illumination:

Infrared Sensitivity:

Camera/Decoder Cable Connector:

Camera/Decoder Cable Type:

Camera/Decoder Cable Distance Range:

Camera/Decoder Video Signal:

PoC Decoder Video Output:

PoC Decoder Video Output Connector:

PoC Decoder Power Input:

PoC Decoder Power Connector:

PoC Decoder Size:

PoC Decoder Weight:

Housing Size:

Base Size:

Base Mounting Holes:

Assembly Weight:

Female F-Connector

Coax: RG6 quad shield recommended

Up to 100’

Proprietary

Composite

Female RCA

24V DC, 200mA

5.5mm OD, 2.1mm ID, center positive

3.2” long, 2.2” wide, 0.9” thick

3 oz.

3.13” dia. x 4” long

4.5“ dia., 0.75” high, 0.5“ hole

3.5” centers

1 lb.

(subject to change without notice)

SPECIFICATIONS

Color

Day/Night Color

3.7mm

1/4” CCD

470 lines

54˚ Horizontal

0.5 Lux F1.2

No

3.6mm

1/3” CCD

540 lines

72˚ Horizontal

0.1/0 Lux

Yes

MAN-POCLAMP REV0905A

MAN-POCLAMP REV0905A

Advertising