NetMedia POCSET - Manual (Page 2)

MAN-POCSET REV0703A
NM-POCSET
NM-POCSET
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: [email protected] www.netmedia.com
Figure 2 - Connecting the modules to multiple pieces of video equipment. Every piece except the last must have a
loopback or video output jack.
Figure 3 - Connecting the modules to a modulator for whole house distribution and standard television viewing
on the modulated channel. The modulator can also be the last piece of equipment in Figure 2.
Installation Procedures:
1. Connect a coax cable (RG6 recommended) to the F-Connectors of the Video Encoder and Decoder. Each
Encoder/Decoder pair needs a dedicated point-to-point wiring circuit. Do not connect the Encoder/Decoder coax
to other video distribution equipment! Doing so could damage this product and/or the other attached devices!
2. Connect a video cable from the camera to the Encoder’s RCA Video In jack. Simple adapters, such as RCA to BNC, may
be used where appropriate.
3. Connect the Power Extension Cable from the Encoder’s Power Output Connector to the camera’s 12V DC power input.
If the camera requires more than 150mA or if it does not use 12V DC then it cannot use the Encoder’s power output.
4. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the Decoder’s RCA Video Out
jack using appropriate adapters where necessary.
5. Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder’s Power Input Connector.
Figure 1 - Connecting the modules to a security monitor or standard television. Use the TV’s composite RCA Video
In jack and view through its video or line input. The picture will not be available on a channel.
Camera
Video Cable
Coax Cable
Monitor
or
Television PoC Video Decoder Module PoC Video Encoder Module
Up to 100 Feet
To Next
Device
AMP
Main cable or
antenna
Modulator
Amplifier
Television
Television
Distribution Panel
or Splitter
Splitter/
Combiner
Camera
Video Cable 24 VDC
INPUT
12 VDC
OUTPUT
VIDEO
POWER
Camera
Video Cable
Monitor
or
Television
Quad
Sequencer
or
DVR
Coax Cable
PoC Video Decoder Module PoC Video Encoder Module
24 VDC
INPUT
12 VDC
OUTPUT
VIDEO
POWER
Coax Cable
PoC Video Decoder Module PoC Video Encoder Module
24 VDC
INPUT
12 VDC
OUTPUT
VIDEO
POWER