Nitek CAMTRV24 - Manual

Description
The CAMTRV24 is a single channel video balun transceiver used for UTP video transmission combined with a
multi-function surge protector for in-line video, 2 wire P/T/Z control and the camera supply voltage. The CAMTRV24
is suited for outdoor cameras, where protection on all signal connections is required. The CAMTRV24 provides a
heavy-duty, single point ground connection. Proper installation is critical for proper operation of the unit. Please
read the instructions completely and insure good ground connections.
Specifications
Size (mm) 1.7” H x 4.3” W x 2.5” D Video Insertion
(43 H x 109 W x 63 D) Loss <0.2dB
Clamping Video—2.8V Impedance 50 or 75 Ohms
Voltage Power—33Vrms Temperature -25°C to +65°C
Control—4.7V Frequency DC to 10 MHz
Model CAMTRV24
Video, Data and Power Surge Protector w/Built-In Balun
Installation and
Operation Manual
Date 12-2012 Rev 123112
NITEK
®
Europe Office:
De Schans 19-21 2a, 8231 KA Lelystad
The Netherlands
Tel: +31(0)320-230005
Fax: +31(0)320-282186
E-mail: [email protected]
WWW.NITEK.NL USA Office:
5410 Newport Drive, Rolling Meadows, IL 60008
Phone: (847) 259-8900 or (800) 528-4343
Fax: (847) 259-1300
E-mail: [email protected]
WWW.NITEK.NET
Doc No. 680240114