Using the virtual cable tester – Asus P5AD2-E User Manual
Page 112
4 - 1 0
4 - 1 0
4 - 1 0
4 - 1 0
4 - 1 0
C h a p t e r 4 : S o f t w a r e s u p p o r t
C h a p t e r 4 : S o f t w a r e s u p p o r t
C h a p t e r 4 : S o f t w a r e s u p p o r t
C h a p t e r 4 : S o f t w a r e s u p p o r t
C h a p t e r 4 : S o f t w a r e s u p p o r t
3.
Click the R u n
R u n
R u n
R u n
R u n button to perform a cable test.
4.3.2
4.3.2
4.3.2
4.3.2
4.3.2
AI NET2
AI NET2
AI NET2
AI NET2
AI NET2
The AI NET2 features the Marvell
®
Virtual Cable Tester™ (VCT). VCT is a
cable diagnostic utility that reports LAN cable faults and shorts using the
Time Domain Reflectometry (TDR) technology. The VCT detects and
reports open and shorted cables, impedance mismatches, pair swaps, pair
polarity problems, and pair skew problems of up to 64 ns at one meter
accuracy.
The VCT feature reduces networking and support costs through a highly
manageable and controlled network system. This utility can be incorporated
in the network systems sofware for ideal field support as well as
development diagnostics.
Using the Virtual Cable Tester™
Using the Virtual Cable Tester™
Using the Virtual Cable Tester™
Using the Virtual Cable Tester™
Using the Virtual Cable Tester™
To use the the Marvell
®
Virtual Cable Tester™ utility:
1.
Launch the VCT utility from the Windows
®
desktop by clicking
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r
S t a r t > A l l P r o g r a m s > M a r v e l l > V i r t u a l C a b l e T e s t e r.
2.
Click V i r t u a l C a b l e T e s t e r
V i r t u a l C a b l e T e s t e r
V i r t u a l C a b l e T e s t e r
V i r t u a l C a b l e T e s t e r
V i r t u a l C a b l e T e s t e r from the menu to display the screen
below.
•
The VCT only runs on systems with Windows
®
XP or Windows
®
2000
operating systems.
•
The VCT utility only tests Ethernet cables connected to Gigabit LAN
port(s).
•
The R u n
R u n
R u n
R u n
R u n button on the Virtual Cable Tester™ main window is
disabled if no problem is detected on the LAN cable(s) connected to
the LAN port(s).
•
If you want the system to check the status of the LAN cable before
entering the OS, enable the item P o s t C h e c k L A N C a b l e
P o s t C h e c k L A N C a b l e
P o s t C h e c k L A N C a b l e
P o s t C h e c k L A N C a b l e
P o s t C h e c k L A N C a b l e in the
BIOS Setup.