Nitek CAMPTR1 - Manual

Rev 042004
Limited Lifetime Warranty
NITEK warrants that this product is to be free from defects in materials
and workmanship, for the life of the product. The warranty given by NITEK
is in lieu of any other warranties, express or implied. NITEK assumes no
responsibility for damages or penalties incurred resulting from the use of
this product. NITEK's liability under any warranties shall be discharged
by replacing or repairing, at our option, the defective product. NITEK's
liability for any product shall not exceed a refund of the purchase price.
The warranty listed here is intended only as a summary of your full and
complete warranty. For a full and complete warranty of this product
contact NITEK.
CAMPTR1
Camera Video Surge Protection Unit
NITEK
®
5410 Newport Drive, Suite 24 • Rolling Meadows, IL 60008
(800) 528-4343 • (847) 259-8900 • FAX (847) 259-1300
Internet: www.nitek.net • E-mail: [email protected]
The CAMPVC1 is designed to provide multistage video surge protec-
tion. It can be used at the headend or the camera end. It is ideally suited for small
spaces or where just a signle line of video needs to be protected.
The CAMPVC1 provides a heavy single point ground connection and
can be installed in minutes. Proper installation is critical to proper operation of
the unit. Please read installation instructions completely and insure good ground
connections.
1.3
0.8
1.5