Nitek FRS1000 User Manual
Nitek, Frs1000 rack
Installation Manual
FRS1000 Rack
Fiber Card Rack System
Note: This installation should be made by a qualified
service person and conform with local codes.
Reduce risk of fire or electrical shock do
not expose this product to rain or moisture.
!
Specifications
Dimensions
Size
19”w x 5.25”h x 10.1” deep
Power Requirements
120/230VAC @ 3A Max
Capacity
10
Card
slots
NITEK
®
5410 Newport Drive, Suite 24
Rolling Meadows, IL 60008
PHONE (847) 259-8900
FAX (847) 259-1300
WWW.NITEK.NET
Installation Instructions
−
Use #6 flathead screws (included) to mount rack ears on unit.
−
Ears can be mounted in forward, flush or reversed depending on your spacing needs.
−
Install Power Supply card (included).
680600123 Rev 092211
Service Information
There are no user serviceable parts inside the unit. In the event that service is required to this unit please
contact NITEK Technical Support at 800-528-4343.
Use screws to mount ears
The mounting ears can be
positioned forward, flush or
reversed depending on your
particular needs. Forward
mounting with the 5000 Series
systems will allow additional
space for fiber bends.
Forward
Insert screws
Insert screws