Antec TWELVE HUNDRED V3 - Manual (Page 8)

7
2.8 Cable Management
There is a cable management compartment between the motherboard and right side panel. You can
tuck or route excess cables in this compartment.
1.
Remove both side panels
2. Choose the cables you would like to pass through the holes behind the motherboard tray and
pull them out of the power supply chamber towards the right side of the case.
3. Use the cable ties provided to hold them in place.
4. Feed the cables back through the insertion point nearest the destination of the cable. Connect
the cable and then pull the slack back to the right side of the case.
2.9 Water Cooling Platform
This case comes with a 5.25” metal plate pre-installed in the 3rd 5.25” drive bay. This plate is designed
to allow you to easily mount components of a water cooling kit such as a pump or reservoir. The plate
can be mounted in any of the twelve 5.25” drive bays for maximum flexibility.
Note: The plate is not pre-drilled. You will need to drill the appropriate holes to be compatible with your
water cooling kit.
2.10 Three-Way SLI Configuration Option
The Twelve Hundred V3 has eight expansion slots, making it capable of
supporting up to three
graphics cards in triple-SLI configuration. Consult your motherboard and graphics cards
manuals for more information.