Nova-Tech GFK Series - Manual (Page 28)

26 | P a g e © Adam Equipment Company 2011
NOTE:
1. If the recalled limit is for parts counting, the display will show the last sample
value used, ready for a new sample to be counted.
2. If the recalled unit is a percent weighing limit, the display will show the last
sample value used, ready for a new sample to be weighed.
3. If the memory location was empty the scale will return to weighing.
10.7. PERCENT WEIGHING
The scale can be set to perform percent weighing. See Section 13.1.
The scale will use a mass on the platform as the 100% reference weight. If the
platform is empty (or the scale is tared) then the user can input a reference weight
using the keypad.
•
If using a reference weight (or object) as your 100% reference, add the
weight to the to the platform.
•
Press [Func]. The first option is “FUnC 1”, press the [Func] key 3 more times to
display “FUnC 4”.
•
Press the [Tare] key. “F4 PCt” will be displayed.