American Standard Hampton 7225.733 - Manual

B29
© 2008 AS America Inc.
HAMPTON
THREE-HANDLE BATH/SHOWER FITTING
GENERAL DESCRIPTION:
Cast brass valve body on 8 inch centers. 1/4 turn washerless
ceramic disc valve cartridges - reversible for use with either
lever or cross handles. 1/2" NPT female threaded inlets and
outlets. Showerhead with 2.5gpm/9.5L/min. flow restrictor.
Third handle provides positive diverting action between
showerhead and tub spout.
7225.723 Shown
MODEL NUMBER:
7225.713 Bath/Shower Fitting
I.P.S. Tub Spout. Porcelain Lever handles.
7225.723 Bath/Shower Fitting
I.P.S. Tub Spout. Metal Cross handles.
7225.733 Bath/Shower Fitting
I.P.S. Tub Spout. Metal Lever handles.
SUGGESTED SPECIFICATION:
Three handle bath/shower fitting shall feature cast brass construction. Shall also feature 1/4 turn washerless ceramic disc valve
cartridges that are reversible for use with cross or lever handles. Fitting shall be American Standard Model # 7225.____.___.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0
5
10
15
20
SHOWER
SPOUT
80 60 40 20
130mm
(5-1/8)REF.
(3) 46mm (1-13/16) DIA.
HOLES FOR VALVES AND
TRANSFER VALVE ON
203mm(8) CENTERS
CROSS
BRACE
FINISHED
WALL
32mm(1-1/4)
DIA HOLE
64mm ± 22mm
(2-1/2 ± 7/8)
102mm
(4)
TOP OF
TUB RIM
OPTIONAL TO
FINISHED FLOOR
USUALLY BETWEEN
1651mm - 1981mm
(65 - 78)
1/2" N.P.T.
SHOWER ARM
32mm
(1-1/4)
DIA HOLE
1/2" COPPER
45mm
(1-3/4)
28mm
(1-1/8)
DIA.
UNION INLET
1/2"-14 N.P.T.
1/2 N.P.T.
TO SHOWER
305mm
(12)
OPTIONAL
102mm
(4)
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
Product
Number
Description
7225.713
Three handle Bath/Shower.
Porcelain Lever handles.
7225.723
Three handle Bath/Shower.
Metal Cross handles.
7225.733
Three handle Bath/Shower.
Metal Lever handles.
Finish Options
Polished
Chrome
P.Chrome
/PVD
Brass
Mix
002 299
PVD
Polished
Brass
099
PVD
Blackened
Bronze
068
PVD
Satin/
Chrome
Mix
221
PVD
Satin
Nickel
295
PVD
Satin/
Brass
Mix
297
N/A = NOT AVAILABLE
N/A N/A N/A
N/A N/A
N/A
N/A N/A
PRODUCT FEATURES:
Brass Construction: Durable - Ideal for prolonged contact
with water. Provides the finest surface for application of all
finishes.
Ceramic Disc Valve Cartridges: Assures a lifetime of
drip-free performance.
Increased Rough-in: 42mm to 86mm (1-5/8 to 3-3/8).
Exclusive Valve Escutcheon Design: 3 piece escutcheon
design accomodates deep and shallow rough-ins. Provides
water tight seal around valves.
Integral Unions: No soldering required.
Exclusive Handle Alignment System: Allows fine
tuning of handle position.
Choice of Finishes: Wide range of durable finishes.
Exclusive Plaster Guard: Plaster guard can be used to
test for leaks prior to handle installation.
75mm
(3)
188cm FOR
HEAD
CLEARANCE
(74")
127 mm REF.
(5") REF.
178 mm REF.
(7") REF.