Fcc compliance, Weee compliance – Nova-Tech PGL Series User Manual

Page 39

Advertising
background image





Manufacturer’s Declaration of Conformity 

Manufacturer’s Declaration of Conformity 

  

This product has been manufactured in accordance with the harmonised European 

standards, following the provisions of the below stated directives: 

This product has been manufactured in accordance with the harmonised European 

standards, following the provisions of the below stated directives: 

  

Electro Magnetic Compatibility Directive 2004/108/EC 

Electro Magnetic Compatibility Directive 2004/108/EC 

  

Low Voltage Directive 2006/95/EC  

Low Voltage Directive 2006/95/EC  

  

Adam Equipment Co. Ltd. 

Adam Equipment Co. Ltd. 

Bond Avenue, Denbigh East  

Bond Avenue, Denbigh East  

Milton Keynes, MK1 1SW 

Milton Keynes, MK1 1SW 

United Kingdom 

United Kingdom 

© Adam Equipment Company 2008

FCC

COMPLIANCE

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  A  digital  device, 
pursuant  to  Part  15  of  the  FCC  Rules.    These  limits  are  designed  to  provide  reasonable  protection 
against  harmful  interference  when  the  equipment  is  operated  in  a  commercial  environment.    The 
equipment  generates,  uses,  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in 
accordance  with  the  instruction  manual,  may  cause  harmful  interference  to  radio  communications.  
Operation of this equipment in a residential area is likely to cause harmful interference in which case 
the user will be required to correct the interference at his own expense. 
 
Shielded  interconnect  cables  must  be  employed  with  this  equipment  to  insure  compliance  with  the 
pertinent RF emission limits governing this device. 
 
Changes or modifications not expressly approved by Adam Equipment could void the user's authority to 
operate the equipment. 

WEEE

COMPLIANCE

 

 

Any  Electrical  or  Electronic  Equipment  (EEE)  component  or  assembly  of  parts  intended  to  be 
incorporated  into  EEE  devices  as  defined  by  European  Directive  2002/95/EEC  must  be  recycled  or 
disposed  using  techniques  that  do  not  introduce  hazardous  substances  harmful  to  our  health  or  the 
environment as listed in Directive 2002/95/EC or amending legislation.  Battery disposal in Landfill Sites 
is more regulated since July 2002 by regulation 9 of the Landfill (England and Wales) Regulations 2002 
and Hazardous Waste Regulations 2005. Battery recycling has become topical and the Waste Electrical 

nd Electronic Equipment (WEEE) Regulations are set to impose targets for recycling.  

a

 

39 |

P a g e

© Adam Equipment Company 2008

Advertising