AT&T 962 - Manual (Page 25)

LOCAL 1 LOCAL 2
Change which
area code?
HOME DONE
23
CALLER ID OPERATION
Message Waiting and NEW CALL Lights
There is a NEW CALL light for each line at the top of the set. The NEW
CALL light will stay on steadily when you have new calls in the call log.
The light will turn off after you have reviewed all new calls. If you
subscribe to a telephone company voice mail service, this light flashes if you
have unretrieved messages waiting.
At times, the system will occasionally receive a false signal and the
NEW CALL light will flash. To turn off the light:
1 Press O, then select VOICE MSG.
2 Softkeys to control line 1 are shown. Use the OK softkey to move
to line 2 if needed. Select LIGHT OFF to correct the message light
for the line shown.
3. Press O when done.
Voice mail signals are sent in two different ways; this set automatically
selects the method which is used by your voice mail service. (Your service
provider can provide you with more information about your service.) If
you move or change service providers, you may need to use the RESET
softkeys shown on the above menus to avoid missing messages.
Softkeys access
Call Waiting
Deluxe features
Scroll through call history
Softkeys access
Call Waiting
Deluxe features
Indicates
additional
options