Audio Analogue SRL XA1000 - Manual (Page 12)

5. TECHNICAL SPECIFICATIONS
MODEL
8 ohms per channel(EIAJ)
4 ohms per channel(EIAJ)
8 ohms, 1KHz, 0.1%THD
Bridge Mono Mode
Distortion (SMPTE-IM)
Frequency Response
Damping Factor, 1 kHz and below
Signal to Noise,20Hz-20KHz
Voltage Gain
Input Sensitivity @ 4 ohms
Input Clipping
Input Impedance
Controls
REAR: LIMITER, BRIDGE SELECTOR
XA500
20Hz [email protected]%THD, Stereo Mode
<0.05%
20Hz-20KHz 1dB, -3dB points: 10Hz-60KHz
>300 at 8ohms
102dB
40x (32dB)
1Vrms
10Vrms (+22dB)
10K ohms unbalanced, 20K ohms balanced 56 (36dB)
FRONT: AC SWITCH, CH1 & CH2 GAIN KNOBS
Continuously variable-speed fan, rear-to-front air flow
On/off muting, DC-fault load grounding relay. Internal fault fuses.
200-240(100-120) Vac 50~60Hz
19" (48.3 cm) rack mounting, 3.5" (8.9 cm) tall (2 rack spaces),
15.9" (40 cm) deep (rack mounting to rear support ears)
11Kg
190W
300W
600W
Indicators (1 per channel)
Connectors, each channel
Cooling
Load Protection
Power Requirements
Dimensions
Net Weight
Power-On: Blue LED
Operation/Protection : Dual Color (Yellow LED)
Limit: Yellow LED
Clip: Red LED
Input: Active balanced XLR
Parallel Output : XLR
Output: NEUTRIK Speakon and Binding posts
R
XA1000
300W
500W
13Kg
1000W
USER'S MANUAL
inside
11 XA500/XA1000