LG DS375 - Manual (Page 48)

22
Additional Information
Last Condition Memory
This player memorizes the user settings for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player. If you load a disc that has its settings memo-
rized, the latest stop position is automatically recalled.
Notes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if
you switch off the player before commencing to play
it.
Screen Saver
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
System Select
You must select the appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE on the front panel for more than
5 seconds to be able to select a system (PAL, NTSC,
or AUTO).
• When the selected system does not coincide with the
system of your TV, normal color picture may not be
displayed.
AUTO: Select when DVD player is connected with
Multi system TV.
NTSC: Select when DVD player is connected with
NTSC-TV.
PAL: Select when DVD player is connected with
PAL-TV.
Controlling the TV
Your remote control is capable of operating your DVD
player as well as limited functions of LG TV.
Follow the instructions below to operate for your LG TV.
11 Before using the remote control, press the DVD or
TV button to select the device to be operated.
To switch the remote control mode (to operate a
different device), be sure to press the DVD or TV
button first.
2 2 The POWER, PR./CH.( E E / D D ), VOL (1 1 /2), MUTE and
TV AV buttons on remote control are used to
operate the LG TV.
Setting Remote Control Codes for LG TV
This remote control supports two remote control
codes for LG TV: Code 1 and Code 2.
When the unit is shipped from the factory, the remote
control is set to Code 1.
To set the remote control to Code 2, hold down both
the TV button and the number “2” button on the
remote control. (If the batteries in the remote control
are replaced while the remote control is set to Code
2, the setting will revert to Code 1.)
To set the remote control back to Code 1, hold down
both the TV button and the number “1” button on the
remote control.
Note
If the remote control does not operate your particular
TV, try the other code or use the remote control
originally supplied with the LG TV.
Due to the variety of codes used by manufacturers,
OUR COMPANY cannot guarantee that the remote
control will operate every model of LG TV.
VCD1.1 CD DVD