Audiovox APS 95 BT3S - Manual

TRANSMITTER PROGRAMMING GUIDE
Model : APS 95 BT3S
The transmitters included with the security system have been pre - programmed
at the factory, with each button pre - assigned to control a specific function of
the security system. Although the security system in the vehicle has either 3
or 4 channels ( RECEIVER ) depending on the model, the transmitters included
with the system are 7 channel transmitters. This allows you to program each
transmitter to more than one vehicle in two car families, and also allows you to
change which button ( s ) control certain functions of the system. ( Example:
Transmitter channel 5 can be programmed to activate Receiver channel 2. )
Refer to the chart below for access to each of the transmitter channels, and
for the standard factory button assignments.
TRANSMITTER SYSTEM RECEIVER
CHANNEL BUTTONS CHANNEL FUNCTION
1 1 1 Remote Arm & Disarm
Remote Emergency Panic
Remote Door Lock & Unlock
2 2 2 * Pulsed Output for Accessories
3 3 3 * Switched Output for Accessories
4 2 & 3 4 * Switched Output for Accessories
5 1 & 2 - -
6 1 & 3 - -
7 1, 2, 3 - -
* Some of the more common accessories for these additional channels are;
AS 9151N Remote car starter
AS 9153 Remote window roll up
AS 9256 Remote trunk release relay