Alpine 3DA-W882E - Manual (Page 55)

55
English
Clock Operation
3 2 4
1
1
12:30
2
12:00
3
4
6
M
9:00
9:35
9:35
CLK TITLE
4
CT
Setting Time
Make sure you are in the Clock mode by
pressing the Clock button (see page 54). Then,
press and hold the CLK (Clock) button for at
least 3 seconds. The time indication will begin
to blink.
To set the time to the nearest hour, press the
CT button while the time indication is blinking.
For example, if the time shown in the display is
9:35, the CT function will change it to 10:00. If
the display shows 9:29, the CT function will set
the time to 9:00.
Example: To adjust to 9:35
Press the "H" button to adjust the hours while
the time indication is blinking.
Press the "M" button to adjust the minutes while
the time indication is blinking.
The time automatically sets after 5 seconds of
inactivity. It can be manually set by pressing the
CLK button immediately after making adjust-
ments. The time display stops blinking when
set.
5
H