PASCO TD-8592 SMALL PISTON HEAT ENGINE APPARATUS - Manual (Page 5)

ii
Small Piston Heat Engine 012-08375A
Equipment Return
If the product requires return to PASCO scientific for any
reason, notify PASCO scientific by letter, phone, or fax
BEFORE returning the product. Upon notification, the
return authorization and shipping instructions will be
promptly issued.
➤ ➤ ➤ ➤ ➤
NOTE: NO EQUIPMENT WILL BE
ACCEPTED FOR RETURN WITHOUT AN
AUTHORIZATION FROM PASCO.
When returning equipment for repair, the units must
be properly packed. Carriers will not accept respon-
sibility for damage caused by improper packing. To
be certain the unit will not be damaged in shipment,
observe the following rules:
➀
The packing carton must be strong enough for the item
shipped.
➁
Make certain there are at least two inches of packing
material between any point on the apparatus and the
inside walls of the carton.
➂
Make certain that the packing material cannot shift in
the box or become compressed, allowing the
instrument come in contact with the packing carton.
Address: PASCO scientific
10101 Foothills Blvd.
Roseville, CA 95747-7100
Phone: (916) 786-3800
FAX: (916) 786-3292
email: [email protected]
web: www.pasco.com
Credits
Editor: Sunny Bishop
Copyright Notice
The PASCO scientific 012-08375A Small Pistion Heat
Engine manual is copyrighted and all rights reserved.
However, permission is granted to non-profit educational
institutions for reproduction of any part of the manual,
providing the reproductions are used only for their
laboratories and are not sold for profit. Reproduction
under any other circumstances, without the written
consent of PASCO scientific, is prohibited.
Limited Warranty
PASCO scientific warrants the product to be free from
defects in materials and workmanship for a period of one
year from the date of shipment to the customer. PASCO
will repair or replace at its option any part of the product
which is deemed to be defective in material or workman-
ship. The warranty does not cover damage to the product
caused by abuse or improper use. Determination of
whether a product failure is the result of a manufacturing
defect or improper use by the customer shall be made
solely by PASCO scientific. Responsibility for the return
of equipment for warranty repair belongs to the customer.
Equipment must be properly packed to prevent damage
and shipped postage or freight prepaid. (Damage caused
by improper packing of the equipment for return shipment
will not be covered by the warranty.) Shipping costs for
returning the equipment after repair will be paid by
PASCO scientific.
Copyright, Warranty, and Equipment Return
Please—Feel free to duplicate this manual
subject to the copyright restrictions below.