PERKO 0309B - Manual

Cat. No. 0112B and 0309B Series White All-Round Lights
Cat. No. 0112RB and 0309RB Series Red All-Round Lights
Cat. No. 0112GB and 0309GB Series Green All-Round Lights
Cat. No. 0112MB and 0309MB Series Yellow All-Round Lights
The above lights are designed for use on sail or power driven vessels under 20 meters (65.6 ft.) in length, operating on a nominal 12
volt or 32 volt system. In order to comply with the '72 COLREGS and the U.S. Inland Rules, the following must be adhered to:
MOUNTING INFORMATION
Read all instructions before proceeding.
1). For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-16*, the '72 COLREGS*, and the U.S.
Inland Rules*.
2). These lights are designed to be mounted on a horizontal surface (Cat. No. 0112 Series) or on a vertical, 1/2 threaded pipe
(Cat. No. 0309 Series).
3). Horizontal rotation of these lights is unimportant, as all-round lights have a 360° horizontal arc of visibility.
4). Cat. No. 0112 Series only:
Unscrew mounting base from light body. Using base as a template, mark the mounting surface and drill to accommodate four
#8 oval-head screws. Then drill an electrical supply clearance hole located approximately in the center of the four mounting
holes on the mounting surface. Attach supply connections to the light and reassemble, making sure to wire in accordance
with both A.B.Y.C. Standard E-9*. and U.S. Coast Guard Safety Standards for Boat Electrical Systems (33 CFR 183)* Fasten
light to the mounting surface.
5). Cat. No. 0309 Series only:
Make sure to wire in accordance With A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical
Systems (33 CFR 183)*. Disassemble the light. Run the supply wire out of the top of the mounting pipe and through the light
body. Screw the body onto the mounting pipe, and seal the pipe connection with compound with Teflon tape. Attach supply
connections to the socket and reassemble the light. (This method prevents twisting the wire inside the pipe when attaching
the light).
*the above referenced standards can be obtained from:
(1). American Boat & Yacht Council, Inc.
613 Third Street, Suite 10
Annapolis, MD 21403
(2). U.S. Coast Guard
Washington, D.C. 20593
(or your local C.G. office)
12/08 PERKO, INC.
0112INS1 16490 N.W. 13th Avenue
Miami, FL 33169-5707
www.perko.com
BULB DATA FOR CAT. NOS. 0112B AND 0309B SERIES LIGHTS
VISIBILITY
CATALOG NUMBERS MILES 12 VOLT BULB 32 VOLT BULB
0112B00CHR 0309B00CHR
2 0340005FRD 0340011FRD
0112B00PLB 0309B00PLB
0112RBOCHR 0309RB0CHR
2 0340006FRD 0340012FRD
0112RB0PLB 0309RB0PLB
0112GB0CHR 0309GB0CHR
2 0340006FRD 0340012FRD
0112GB0PLB 0309GB0PLB
0112MB0CHR 0309MB0CHR
2 0340005FRD 0340011FRD
0112MB0PLB 0309MB0PLB