PERKO 0232 User Manual

Template, Mounting information

Advertising
background image

Cat. No. 0229 Series Bi Color Lights

Cat No. 0232 Series Side Lights

The above lights are designed for use on power driven vessels under 20 meters (65.6 ft.) in length operating on a nominal 12 volt or 24
volt system. In order to comply with ‘72 COLREGS and the U.S. Inland Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding

1). For proper light selection, positioning and configuration, refer to the A.B.Y.C. Standard A-16*, the ‘72 COLREGS* and the

U.S. Inland Rules*. These lights are supplied complete with 12 volt bulb (Cat No. 0071DP0CLR 12V, 10W), however, 24 volt bulbs
(0072DP1CLR) are available for 24 volt systems.

NOTE: PERKO series 0229 & 0232 used with a 24V bulb (Cat. No. 0072DP1CLR)

are not certified in accordance with 33 CFR 183.810 as these lights are intended for replacement use only on appropriate vessels
constructed prior to 11/1/03. All previous certifications apply.

2). These lights are designed to be mounted on a horizontal surface.

3). Draw a 6 inch long reference line through the center of the selected mounting location and parallel to the centerline of the boat.

4). Cut out the mounting template. Place it on the mounting surface such that the reference line (drawn above) is directly underneath

the reference line marked on the template.

5). Drill 2 holes through the template to accommodate #8 round or pan head mounting screws. Drill a 1/4 inch hole to accommodate

the electric wiring.

6). Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C. Standard E-9* and U.S. Coast Guard

Safety Standards for Boat Electrical Systems (33 CFR 183)*.

7). Mount the light in accordance with the template. Note that there are thin reference marks around the outside of the base that must

be aligned with the reference line (drawn in Step #3) for final accuracy of mounting orientation.

* The above referenced Standards can be obtained from:

1) American Boat & Yacht Council, Inc

2)

U.S. Coast Guard

PERKO, Inc.

3069 Soloman’s Island Road

Washington D.C. 20593

16490 N.W. 13th Avenue

Edgewater, Maryland 21037

(or your local C.G. office)

Miami, Florida 33169-5707
www.perko.com

10/03
0229INS1

TEMPLATE

Cut out Template Below

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Tested By: IMANNA Labs.

Dates: 5/16/03, 11/25/03

Meets ABYC A-16

Advertising
This manual is related to the following products: