PERKO 0466 - Manual

In order to comply with ‘72 COLREGS and the U.S. Inland Rules, the following must
be adhered to:
MOUNTING INFORMATION
Read all instructions before proceeding.
1). For proper light selection, positioning and configuration, refer to A.B.Y.C.
Standard A-16*, the ‘72 COLREGS*, and the U.S. Inland Rules*.
2). These lights are designed to be mounted on a horizontal surface. Horizontal
rotation of these lights is unimportant, as all-round lights have 360° horizontal arc
of visibility.
3). Place a mark at center of the selected mounting location.
4). Cut out the mounting template below. Place it on the mounting surface such that
the reference mark (drawn above) is directly underneath the center of the template.
5). Drill indicated holes through the template to accommodate #8 round or pan head
mounting screws and electrical supply.
6). Attach supply connections to the light, making sure to wire in accordance with both
A.B.Y.C. Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical
Systems (33 CFR 183)*.
7). Mount the base in accordance with the template.
8). IMPORTANT: Globes must be vertical during operation (see Diagram #1).
9). Relamp only with bulb type as marked on globe or inside fixture. For these lights
use ANSI #90 bulbs (PERKO Cat. No. 0337011DP 12V, 7W).
*The above referenced standards can be obtained from:
(1). American Boat & Yacht Council, Inc. (2). U.S. Coast Guard
613 Third Street, Suite 10 Washington, D.C. 20593
Annapolis, MD 21403 (or your local C.G. Office)
PERKO, INC.
16490 N.W. 13th Avenue
Miami, FL 33169-57070
www.perko.com
12/08
0455INS1
CAT NOS. 0455 & 0466 SERIES
MOUNTING TEMPLATE
NOTE: GLOBES MUST BE
VERTICAL DURING
OPERATION
DIAGRAM #1
Cat. No. 0466 Series
White All-Round Lights (All Sizes)
These lights are designed for use on POWER or SAIL
driven vessels under 20 meters (65.6 ft.) in length
operating on a nominal 12 volt system.
Cat. No. 0455 Series
White All-Round Lights (All Sizes)
These lights are designed for use on POWER driven
vessels under 20 meters (65.6 ft.) in length
operating on a nominal 12 volt system.
Fig. 0455 Series
(Power Driven
Vessels Only)
Fig. 0466 Series
(Sail or Power
Driven Vessels)
USCG APPROVAL
33 CFR 183.810
Visibility: 2nm
Date Tested By: IMANNA Labs.
2/4/03
Meets ABYC A-16