PERKO 1209 User Manual

Mounting template diagram #1

Advertising
background image

Note:

Globe Must Be
Vertical During
Operation.

MOUNTING TEMPLATE

DIAGRAM #1

Cat. No. 1209 White All-Round Lights (All Sizes)

The above lights are designed for use on power driven vessels under 20 meters (65.6 ft.) in length
operating on a nominal 12 volt system. In order to comply with ‘72 COLREGS and the U.S. Inland
Rules, the following must be adhered to:

MOUNTING INFORMATION

Read all instructions before proceeding.

1 ).

For proper light selection, positioning and configuration, refer to A.B.Y.C. Standard A-16* the
‘72 COLREGS* and the U.S. Inland Rules*.

2).

These lights are designed to be mounted on a horizontal surface.

3).

Draw a 6 inch long reference line through the center of the selected mounting location and
parallel to the fore-aft centerline of the boat.

4).

Cut out the mounting template below. Tape it on to the mounting surface such that the reference

line (drawn in step 3) is directly underneath the reference line marked on the template.

5).

Drill indicated holes through the template to accommodate #8 oval head mounting screws and

socket, as required.

6).

Attach supply connections to the light, making sure to wire in accordance with both A.B.Y.C.

Standard E-9* and U.S. Coast Guard Safety Standards for Boat Electrical Systems

(33 CFR 183)*.

7).

Mount the base in accordance with the template.

8).

IMPORTANT: Globe must be vertical during operation (See Diagram #1).

9).

Insert the pole into the base and engage the electrical connector. Tighten the black collar. A cap

is provided to protect the base connector when the pole is removed. A cap retainer is also

provided to hold the cap while the light is in use, and should be conveniently mounted nearby.

10). Relamp only with bulb type as marked on globe or inside fixture, ANSI #90 bulbs

(PERKO Cat. No. 0337011DP 12V, 7W).

*The above referenced standards can be obtained from:

(1).

American Boat & Yacht Council, Inc.
3069 Solomon’s Island Road
Edgewater, Maryland 21037

(2).

U.S. Coast Guard
Washington, D.C. 20593
(or your local C.G. office)

PERKO, INC.
16490 N.W. 13th Avenue
Miami, FL 33169-5707
www.perko.com

4/05
1209INS1

USCG APPROVAL

33 CFR 183.810

Visibility: 2nm

Tested By: IMANNA Labs.

Date: 2/4/03

Meets ABYC A-16

Advertising