Allied Telesis Series - Manual

Software Maintenance Release Note
Version 89273-02
for AT-8900 and AT-9900 series switches
Introduction
This release note lists the issues addressed and enhancements made in version
89273-02 for Software Release 2.7.3 on existing models of AT-8900 and AT-9900
series switches. File details are listed in Table 1.
This release note should be read in conjunction with the following documents:
■ Release Note: Software Release 2.7.3 for AT-9900, AT-8900, SwitchBlade,
AT-9800, AT-8800, Rapier, Rapier i, AT-8700XL, and AT-8600 Series
Switches and AR400 and AR700 Series Routers (Document Number C613-
10431-00 REV A) available from
www.alliedtelesyn.com
■ AT-8900 series switch Documentation Set for Software Release 2.6.2
available on the Documentation and Tools CD-ROM packaged with your
switch, or from
www.alliedtelesyn.co.nz/documentation/documentation.html .
■ AT-9900 series switch Documentation Set for Software Release 2.6.6
available on the Documentation and Tools CD-ROM packaged with your
switch, or from
www.alliedtelesyn.com .
WARNING: Using a maintenance release for a different model or software
release may cause unpredictable results, including disruption to the network.
Information in this release note is subject to change without notice and does
not represent a commitment on the part of Allied Telesyn International. While
every effort has been made to ensure that the information contained within this
document and the features and changes described are accurate, Allied Telesyn
International can not accept any type of liability for errors in, or omissions
arising from the use of this information.
Table 1: File details for version 89273-02.
Base Software Release File 89-273.rez
Release Date 29 April 2005
Compressed File Name 89273-02.rez
Compressed File Size 4263880 bytes