E: start-up procedure – Perma Pure iCOOL User Manual
Page 9
Advertising
Section E: Start-up Procedure
9
E:
S
TART
-
UP
P
ROCEDURE
Plug in the power cord to a properly grounded main circuit. The Ready Green LED
will come on within 3 minutes, indicating the relay temperature (10°C) has been
achieved. After approximately 3 minutes, the set point of +3.5°C. (38.3°F) is
achieved. The sample gas flow may be started immediately after the Green LED
comes on.
The ICOOL is virtually maintenance free. However, in the event of electrical
problems, contact the Perma Pure LLC service department for troubleshooting
assistance.
Advertising