Operating procedure, T1 t2 t3 t4 – Bosch DWK09M760 Vulkan Schwarz Wandesse 90 cm Schräg-Essen-Design User Manual

Page 30

Advertising
background image

30

Operating procedure

To deactivate the function before time is

up press T2 button, the hood sets to

speed 3.

T4 Speed timing

Speed timing is activated by pressing T4

button, when timing is up the hood

switches off.
Timing is divided as follows:
Speed 1 - 20 minutes (LED 1 flashing)
Speed 2 - 15 minutes (LED 2 flashing)
Speed 3 - 10 minutes (LED 3 flashing)
Speed 4 - 5 minutes (LED 4 flashing)

During timed operation press T2 button and

the hood quits the timed mode and

decreases the speed.
Press T3 button and the hood quits the timed

mode and increases the speed.
Press T4 button and the hood quits the timed

mode maintaining the set speed.

The most effective

method of removing

vapours produced

during cooking is to:
Switch the

ventilator ON as

soon as you begin

cooking.

Switch the

ventilator OFF a few
minutes after you

have finished

cooking.

T1

T2

T3

T4

T1.Lights ON/OFF
T2.Speed decrease

Press “T2” button to decrease the speed

from 4 (intensive) to 1.
Press “T2” button during operation at

speed 1, the hood sets to OFF.

T3 Speed increase

Press T3 button and the hood sets from

OFF to speed 1.
Press the button (hood ON) to increase

the speed of the motor from 1 to 4
(intensive).
The respective LED goes on for each

speed.
Speed 1 LED 1
Speed 2 LED 2
Speed 3 LED 3
Intensive speed LED 4 (flashing)
The intensive speed is timed. Standard

timing is 5’, at the end of which the hood
sets to speed 2.

Advertising