ATEN ACS1216A - Manual (Page 39)

Chapter 4. OSD Operation
31
F5 SKP:
Clicking the F5 field or pressing [F5] invokes Skip (SKP) mode. This function
enables you to easily skip backward or forward – switching the console focus
from the currently active computer port to the previous or next available one.
Š The selection of computers to be available for Skip mode switching is
made with the Scan/Skip mode setting under the F3 SET function (see
page 26).
Š When you are in Skip mode, press [
←
] to switch to the previous
computer in the List; press [
→ ]
to switch to the next computer in the
List; press [
↑ ]
to switch to the last computer on the previous station in
the List; press [
↓ ]
to switch to the first computer on the next station in the
List.
Note: When you Skip, you only Skip to the the previous or next available
computer that is in the Scan/Skip mode selection (page 27).
Š If a Port has been selected for Scan/Skip mode, when the focus switches to
that port a Left/Right Triangle symbol appears before its Port ID Display
to indicate so.
Š While Skip mode is in effect, the console will not function normally. You
must exit Skip Mode in order to regain control of the console.
Š To exit Skip mode, press [Spacebar] or [Esc].