ATEN ACS1216A - Manual (Page 56)

ACS1208A / ACS1216A User Manual
48
Restoring Original Factory Default Settings
You can restore the original factory default settings for the ACS1208A /
ACS1216A. The original password for the default administrator account is
restored; all administrator and user accounts are removed from the system.
Only the station name and date and time are retained. This procedure requires
the use of a jumper cap.
1. Turn off the ACS1208A / ACS1216A and unplug the power cord.
2. Remove the cover of the ACS1208A / ACS1216A.
3. Place a jumper cap over pins 1-2 of the J18 jumper on the mainboard.
4. Plug in the power cord and turn on the ACS1208A / ACS1216A. The
following directions appear on the KVM console screen:
USERNAME AND PASSWORD INFORMATION AND PORT/USER
INFORMATION HAS BEEN CLEARED. PLEASE POWER OFF THE
SWITCH, REMOVE THE JUMPER, CLOSE THE CASE, THEN
RESTART.
5. Turn off the ACS1208A / ACS1216A and unplug the power cord.
6. Remove the jumper cap from pins 1-2 of the J18 jumper.
7. Replace the cover on the KVM switch. Plug in the power cord and turn on
the ACS1208A / ACS1216A.
8. You should now use the default username and password to log in to the
ACS1208A / ACS1216A.
J18