Audiovox VE1040 - Manual (Page 16)

26
Using advanced features
Play the tape automatically
This feature allows the VCR to automatically start playing
when you insert a tape with the safety tab removed.
1 Press MENU to display the menu.
2 Press 4 to choose Functions
3 Press 1 to switch between ON and OFF
- Select ON if you want a tape with its safety tab
removed to start playing automatically when the tape
is inserted.
- Select OFF if you do not want a tape with its safety
tab removed to start playing automatically.
Switch the VCR to TV or VCR mode automatically
This feature controls whether the TV/VCR switch changes
automatically to the VCR mode when the VCR is turned
on.
1 Press MENU to display the menu.
2 Press 4 to choose Functions
3 Press 2 to switch between ON and OFF
- Select ON if you want the VCR to switch to the VCR
mode when the VCR is turned on or a casssette is
inserted. This only applies if you connect the ANT.IN
and RF OUT jacks of your VCR and TV and watch
your VCR on channel 3 or 4 of your TV.
FUNCTIONS
1 Auto Play: ON
2 Auto TV/VCR: ON
3 Index Search
4 Go-To Search
MENU Exit
25
3 Press 2 to select Review/Cancel Programs. Press
MENU to cycle the programs.
4 When the program contents to be erased is
displayed, press CLEAR to cancel it.
5 Press MENU repeatedly to return to normal viewing.
One touch timer recording (OTR)
One touch timer records a program for a preset
recording time (30 minutes to 4 hours).
1 Be certain to do the tasks in the section, “Preparing
to record a program”.
2 Use 0-9 or –CH/TRK+ to select the channel to
record.
3 Press REC/OTR to begin recording.
4 Continue to press REC/OTR to increase the time
length of the recording.
Press REC/OTR To record
one time . normal (no recording time limit)
two times 30 mins.
three times 1 hour
four times 1 hour 30 mins.
five times 2 hours
six times 3 hours
seven times 4 hours