ALESIS WILDFIRE 15 User Manual
Page 2
Quick Start Owner's Manual (English)
Quick Setup for the Wildfire
1.
Make sure all items listed on the front of this guide are in the Wildfire's box.
2.
Read the Important Safety Instructions document included with the Wildfire.
3.
Study the Hookup Diagram below.
4.
Make sure all equipment is turned off and all gain knobs are set to zero.
5.
Connect your guitar and other equipment to the Wildfire in the manner illustrated below. Refer to the
Features section for details on which cables and equipment to use.
6.
Plug in all devices and turn them on.
7.
Experiment with the Wildfire's effect combinations. Refer to the Effect Quick Reference on the next page.
8.
When finished, turn off the amp before disconnecting any equipment to prevent damage to the speaker.
9.
Go to http://www.alesis.com to register the Wildfire.
Fron
t Panel
Input Display
VALUE Knob
BASS Knob
MASTER VOLUME Knob
Power Switch
Program Up/Down
EFFECT Knob
DRIVE Knob
TREBLE Knob
HEADPHONES Jack
Note:
Wildfire 60 is
pictured. Some
of the front
panel features
are not found
on the Wildfire
15 and 30.
Rear Panel
Fuse
FOOTSWITCH UP/DOWN INPUTS
AUX INPUT
SPEAKER OUTPUT
Power Cord
EXPRESSION PEDAL INPUT
STEREO LINK OUTPUT
Wildfire Hookup Diagram
Expression
Pedal
Front Panel
Rear Panel
Footswitches
CD
Player
Amp