Apex Digital 10 - Manual (Page 18)

grILLe Badge fIxIng
(Apex 40 only)
The Apex grille is not supplied with the badge attached. There are two potenetial positions
for the badge depending on orientation, therefore the decision is left to the end user by
providing the badge loose.
If the cabinet will be positioned vertically, use the badge location on the narrow edge of the
grille (illustrated below). Press the badge through the cloth and attach the rubber grip onto
the back of the spike.
If the cabinet will be positioned horizontally, use the badge location on the broader edge of
the grille (illustrated below). Press the badge through the cloth and attach the rubber grip
onto the back of the spike.
monitoraudio.co.uk 16