Alliance Laundry Systems PHM1401C - Manual (Page 42)

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Global Setup
F8138801 40
Press the keypad to return to Global Setup
Menu. If no changes were made, press the
or keypad to return to Global Setup Menu.
The control’s Clock will automatically adjust for leap-
year. The control may be programmed for automatic
daylight saving adjustment. If the Daylight Saving
option is disabled, no adjustment takes place. If it is
enabled, on the second Sunday in March, the time will
spring forward from 1:00 AM to 2:00:00 AM. On the
first Sunday in November, the time falls back from
2:00:00 AM to 1:00:00 AM.
Daylight Saving can be enabled or disabled by moving
highlighted box to Daylight Saving and
pressing or to Yes or No. The Save
Changes Menu will display. Use or to
move highlighted box to “Yes” or “No”. Press
keypad to return to Global Setup Menu. If no changes
were made, press or keypad to return to
Global Setup Menu. The factory-default value for
daylights saving is enabled.
Water Level Menu
The Water Level Menu sets the different global water
level settings. The value of the water level is a
percentage of the machine maximum water level,
which is in 30 equal parts or levels. In the 30 different
settings, the image will contain three different regions.
The regions are found in Table 3.
The water level settings will apply to all cycles that are
programmed using low, medium or high in the water
level setting.
The and keypads are used to move the
highlighted box through the different items in the
menu. Once the item is highlighted, the value can be
changed by using the and keypads. The
Save Changes Menu will display. Use or
to move highlighted box to “Yes” or “No”.
Press keypad to return to Global menu. If no
changes were made, press or keypad to
return to Global Setup Menu.
Temperature Menu
The Temperature Menu sets the different global
temperature settings. The unit of the temperature can
be changed between Fahrenheit and Celsius. The
temperature settings will apply to all cycles that are
programmed using COLD, WARM, and HOT in the
temperature setting. The Temperature Controlled Fill
option will allow the user, with a temperature sensor
present, to chose whether to run the machine with
Temperature controlled Fill On or Off.
PHM1039R
Figure 42
Water Level
Units
High
27
15
Medium
3
Low
Water Level Value
Low (20%) 01-10
Medium (30%) 11-20
High (40%) 21-30
Table 3
PHM1040R
Figure 43
Temperature
Off
Fahrenheit
Temp Controlled Fill
110
Cooldown
140
Hot
100
TempWarm
35
Cold
F ˚
F ˚
F ˚
F ˚