Ionisation, Cool button, Diffuser – Bosch PHD5962 Haartrockner PureStyle User Manual

Page 11: Controls and accessories

Advertising
background image

9

PHD5962 03/2012

9

en

Ionisation

This hair dryer features ionisation

technology. Ions are electrically loaded

particles that exist in the air, which are

created by an ion generator in the hair

dryer.

These make the hair softer and easier to

comb. The static charge in the hair which

causes “fly-away” hair is reduced (= anti-

static effect).

The ionisation function can be switched on

and off by means of switch

3. The LED strip

light lights up red as soon as the ionisation

is switched on.

Cool button

3

The Cool function is ideal for ‚setting‘ the

hair after drying. It fixes the individual hair

sections with the cool airflow.

Press the Cool button

3

to activate the

cooling function in any setting.

Press the Cool button

3

again to switch off

the cooling function.

Diffuser

The diffuser

7 is ideal for straight or dam-

aged hair. It gives fine, long or medium-

length hair more volume.

Hold the tips of the diffuser upwards, tilt your

head sideways and run the diffuser into your

hair from below, lifting it up. The hair should

rest gently between the individual fingers of

the diffuser while drying.

Use:

● Set the fan and temperature to a low

setting.

● To ‘set’ the volume and natural curls,

press the Cool button

3

.

● Repeat the process with individual

sections of hair.

Congratulations on purchasing this

Bosch appliance.

You have acquired a high-quality prod-

uct that will bring you a lot of enjoyment.

Controls and accessories

1 Temperature slide switch

k

õ

= low

ô

= medium

k

= high

2 Fan slide switch

l

= off

ó

= gentle

l

= strong

3 Ionisation switch ion

4 Ionisation LED light strip

5 Lockable Cool button

3

6 Air inlet grill (removable)

7 Diffuser

8 Styling nozzle

9 Hanging eyelet

Use

The blow and temperature settings can be

freely combined.

General

● Never cover the blower or air inlet.

● Make sure the air inlet is free of lint and

hair.

● The hairdryer will switch off automatically

if it overheats due to the air inlet being

covered. It will switch back on automatically

after a few minutes.

Important: Be sure to unplug the appliance

and wait a few minutes until it has cooled

down. It can then be used as before.

● To pre-dry wet hair, select the higher set-

ting

l

. Hold the appliance about 10 cm

away from your head.

Advertising
This manual is related to the following products: