Brush vacuuming, Maintenance – Bosch Zooo ProAnimal Beutelloser Bodenstaubsauger BGS51842 tornadorot User Manual

Page 6

Advertising
background image

4

Brush vacuuming

!

Please note

Only brush vacuum using full suction power, i.e.

maximum power setting on the vacuum cleaner.

Figure

In order to achieve the optimum cleaning effect for

different types of floor coverings, the suction regulator

should be adjusted accordingly, depending on the type of

carpet.

=> long pile/closely woven carpets

=> short pile/loosely woven carpets or hard floors

In the viewing window at the side, you can tell from the

speed at which the turbine is turning how fast the brush

roller is rotating.

If the brush is vacuuming too firmly or is turning too slowly,

the suction regulator should be turned further towards the

symbol.

Figure

Only brush carpet fringes in the direction of the arrow.

Maintenance

Always switch off the vacuum cleaner and unplug the

power cable before carrying out maintenance work.

Remove the turbo brush from the suction/telescopic tube

Figure

Release the brush roller using the unlocking knob and pull

it sideways out of the turbo brush.

Figure

Use scissors to cut through threads and hairs wound

round the rollers.

Figure

Vacuuming off threads and hairs.

Figure

Push the brush roller in sideways along the guide rod and

lock in place using the unlocking knob.

!

Please note: The turbo brush must only be put into

operation with the brush roller fitted.

Subject to technical modifications.

2*

3

4

5

6

7

GA 9000 803 618_Turbo Zoo 11.07.2012 07:59 Seite 4

Advertising