Akasa integral HDD external enclosure for data-storage mobility with LAN sharing - Manual (Page 15)

Register a New Device
Refresh Status
About
Options
Exit
Mounted (RW)
Mounted (RO)
Unmount
Properties
Disconnected
Unregister
Properties
Connected
Mount (Read-Only)
Mount (Read/Write)
Deactivated
Activate
To see an INTEGRAL LAN status click on the NDAS Device Management icon located on the system tray. All
registered NDAS device(s) will be displayed on the NDAS Device Management Menu.
WARNING :
Always unmount the INTEGRAL LAN enclosure on all PC’s with access before switching it off. Alternatively you
can shut down all the systems accessing the INTEGRAL LAN before switching it off.
NOTE: To change the status o f the INTEGRAL LAN device you need to umount it f irst.
NDAS Device Management Menu
Registers an INTEGRAL LAN to your computer Updates
status of your INTEGRAL LAN
Displays NDAS software version information
Can customize INTEGRAL LAN management features
and error messages/dialogs
Exits INTEGRAL LAN Management
INTEGRAL LAN mounted with read and write rights
INTEGRAL LAN mounted with read only rights Enables
users to change INTEGRAL LAN mode Displays
properties of the INTEGRAL LAN
The INTEGRAL LAN is disconnected
Enables users to un-register INTEGRAL LAN device
Displays properties of the INTEGRAL LAN
INTEGRAL LAN connected but not mounted
Mounts the INTEGRAL LAN with read only rights
Mounts the INTEGRAL LAN with write/read rights
There is no communication with INTEGRAL LAN
Activates INTEGRAL LAN into Connected mode
Frequently Asked Questions
For the latest FAQ look at the http://www.akasa.co.uk/
Network Connection
15