Operation, How to use your tractor – Poulan Pro PBLGT26H54 GARDEN TRACTOR User Manual

Page 12

Advertising
background image

12

ENGINE -
• Move throttle control (D) to slow position.
NOTE: Failure to move throttle control to slow position and

allowing engine to idle before stopping may cause engine

to “back fire”.
• Turn ignition key (F) to “STOP” position and remove

key. Always remove key when leaving tractor to prevent

un au tho rized use.

• Never use the choke to stop the engine.

IMPORTANT: LEAVING THE IGNITION SWITCH IN ANY

POSITION OTHER THAN "STOP" WILL CAUSE THE BATTERY

TO DISCHARGE AND GO DEAD.

NOTE: Under certain conditions when tractor is standing

idle with the engine running, hot engine exhaust gases

may cause “browning” of grass. To eliminate this possibility,

always stop engine when stopping tractor on grass areas.

CAUTION: Always stop tractor com-

plete ly, as described above, and set

parking brake before leav ing the op er a-

tor's position.

OPERATION

The operation of any tractor can result in foreign objects thrown into the eyes, which can result

in severe eye dam age. Always wear safety glass es or eye shields while operating your tractor

or per form ing any ad just ments or repairs. We rec om mend standard safety glasses or a wide

vision safety mask worn over spectacles.

HOW TO USE YOUR TRACTOR

TO SET PARKING BRAKE (See Fig. 17)

Your tractor is equipped with an operator presence sens-

ing switch. When engine is running, any attempt by the

op er a tor to leave the seat without first setting the parking

brake will shut off the engine.
• Depress clutch/brake pedal (B) all the way down and

hold.

Pull parking brake lever (C) up and hold, re lease pres-

sure from clutch/brake pedal (B), then release parking

brake lever. Pedal should re main in brake position.

Ensure parking brake will hold tractor secure.

B

C

Fig. 17

Fig. 18

( )

ATTACHMENT

CLUTCH SWITCH

“ENGAGED”

(

) ATTACHMENT

CLUTCH SWITCH

“DIS EN GAGED”

Fig. 19

D

F

TO USE THROTTLE CONTROL (D) (See Fig. 19)

Always operate engine at full speed (fast).

Operating engine at less than full speed (fast) reduces

the engine's operating efficiency.

• Full speed (fast) of fers the best mower per for mance.

GROUND DRIVE -
• To stop ground drive, depress brake pedal all the way

down.

• Move motion control lever (J) to neutral position.

STOPPING (See Fig. 18)

MOWER BLADES -

To stop mower blades, place attachment clutch control

in the “DIS EN GAGED” position (

).

Advertising