Poulan Pro Pro 900 ZX 968999302 - Manual (Page 29)

English-
27
OPERATION
8. Press in and turn the ignition key to the
start position.
9. When the engine starts, immediately
release the ignition key back to the run
position
10. Set the desired engine speed with the
throttle.
Allow the engine to run at a moderate
speed, ”half throttle”, for 3-5 minutes before
loading it too heavily.
USE FULL THROTTLE WHEN MOWING
(no choke).
8011-7422
Turn to the start position
8011-7432
Return to run position
8011-7542
Set the engine speed
WARNING!
Engine exhaust and certain
vehicle components contain or
emit chemicals considered to
cause cancer, birth defects, or
other reproductive system
damage. The engine exhaust
contains carbon monoxide,
which is an odorless,
colorless, poisonous gas. Do
not use the machine in
enclosed spaces.
IMPORTANT INFORMATION
Do not run the starter for more than
5 seconds each time. If the engine does
not start, wait about 60 seconds before
re-trying.