Air medic, Filters assembly – AllerAir AirMedic+ none User Manual

Page 3

Advertising
background image

FILTERS ASSEMBLY -

Air Medic +

+

Step 3

Gently grasp wheels. Remove the
base by pulling gently on the wheel

Step 1

Turn Power Off and
unplug from receptacle.

Lay unit upside down.

Step 4

Reach inside the unit and remove
only 1 of the 2 felt pads.

Step 5

Gently insert HEPA filter into the

unit.

Step 6

Than put in the Carbon filter.

Step 2

With a #2 Philips screw driver,
remove the four screws from the
bottom of the unit.

Step 8

Place lid back to its proper position
by aligning the arrow with the rear
seam.

Step 9

With a screw driver, place 4
screws back into their positions.

Step 10

Gently turn the unit back onto its wheels. And your AllerAir purifier is now ready for use.

Step 7

Put back the felt pad removed in

Step 4.

Congratulations, you are moments away from fresher, cleaner indoor air. Your new
AllerAir unit will combat many of the chemicals, gases, odors and particles
responsible for poor indoor air quality, and in turn, health concerns such as
allergies, asthma, sick building syndrome and multiple chemical sensitivity. As with
any air cleaner, proper maintenance of your unit is a vital part of keeping it
operating at peak efficiency.

The AllerAir AirMedic+

+ - Indoor Air Purification System

Operation:

Your unit is shipped fully assembled and ready for use. Plug into 120V-15amp
outlet. For best results situate your unit close to your sitting, sleeping or work area.

NOTE: Please save your packaging. Original packaging will be required for all
warranty returns.

AllerAir Industries Inc.

Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com

Follow this instruction when your filters and unit are shipped in separated boxes.

6

3

TEN YEAR LIMITED WARRANTY

AllerAir units in this series are covered by a ten-year warranty against defects in
materials and workmanship for a period of ten years from the date of purchase.
Warranties are limited to the original purchaser and are thus non-
transferrable.

Units must be shipped back to AllerAir in their original packaging. Clients are
responsible for insuring packages with carriers such as UPS.

The warranty does not cover expendable parts such as filters and pre-filters.

AllerAir Industries Inc. is not liable for any consequential damages for breach of this
or any other warranty expressed or implied whatsoever.

Five years parts and labor additional five years parts.

AllerAir top quality air purification machines are distributed worldwide
for commercial, residential, institutional and industrial use. The units
employ cutting-edge technology, and are built according to the highest
standards required for health and safety.

Advertising