Power Probe 1 - Manual (Page 4)

H
OOK
-U
P
Q
UICK
S
ELF
-T
EST
Unroll the Power Probe cable.
Clamp the RED battery hook-up clip to the POSITIVE terminal of the vehicle’s battery.
Clamp the BLACK battery hook-up clip to the NEGATIVE terminal of the vehicle’s battery.
Rock the power switch forward (+), the LED indicator should light RED.
(The PP2 will sound a high pitched tone in addition to the red light)
Rock the power switch rearward (-), the LED indicator should light GREEN.
(The PP2 will sound a low pitched tone in addition to the green light)
The Power Probe is now ready to use.
If the indicator did not light, depress the reset button of the circuit breaker on the right side of
the housing and try the self test again.
C
ONEXIÓN
/
/
3