Poweramp VS VERTICAL SPECIALTY 4.2009 - Manual (Page 21)

19 4111-0008 — April 2008
OPERATION
End Loading/Unloading — Platform at Cross-Traffic Position.
End Loading/Unloading — Platform at Below-Dock Position.
1. Check to make sure truck/trailer is positioned
squarely against dock bumpers.
2. Instruct driver to remain at the dock until the
loading or unloading process has been completed.
3. Chock the truck/trailer wheels or use the truck
restraint if available.
4. Lower platform and lower the lip.
Lower platform until the legs on the bottom of
the leveler makes contact with the pit floor.
5. Proceed with loading or unloading.
Below Dock End Loading/Unloading Instructions
NOTE: Optional Lip Keepers
1. Check to make sure truck/trailer is positioned
squarely against dock bumpers.
2. Instruct driver to remain at the dock until the
loading or unloading process has been completed.
3. Chock the truck/trailer wheels or use the truck
restraint if available.
4. Lower platform and lower lip until lip makes
contact with the Lip Keepers.
5. Proceed with loading or unloading..
Operating Instructions—Continued
Dock Leveler Loading/Unloading Instructions