PROLiNK PME200 User Manual - Manual (Page 8)

PROLiNK ® PME200 User Manual www.prolink2u.com
Version
1.00 (Jan’09) 6 User Manual (English)
2.3 Buttons & Components functions:
View Buttons/Components S R Functions
Wireless antenna z z 3 Pcs of 2dBi detachable antennas.
Power button z z Switch the button to turn on or off the power supply.
Source button z z
Click the button to switch media sources or keep on pushing the button to
switch input media sources continuously.
Front V
iew
Channels button z z
Click the button to switch Wi-Fi channels.
Notice: When the transmitter channel is switched the receiver channel will be
switched simultaneously.
Reset button z z Reset This button is for reset to default setting.
Audio z z Audio Connect the audio cable for audio output.
VGA z z Connect the VGA cable to the corresponding VGA port.
Component (YPbPr) z z
Connect the Component cables to the corresponding Component connection
ports.
S-Video z Connect the S-Video cable to the S-Video port.
Composite z Connect the CVBS cable to the CVBS port.
Rear View
Power (12V DC) z z 12V DC Connect the power adapter to the power DC port.
Antenna ports z z Detachable antenna to be connected.
Wi-Fi LED z z
CH 1 LED z z
CH 2 LED z z
CH 3 LED z z
CH 4 LED z z
VGA LED z z
Components LED z z
S-Video LED z
Top
V
ie
w
Composite LED z
Refers to below 2.4 LED Indications Behaviors
‘S’ referring to Wireless-N Media S; ‘R’ referring to Wireless-N Media R
2.4 LED Indications Behaviors
LED Color Behavior Indication
On Wireless function is active
Green
Blinking Data transmitting Wi-Fi
Red Blinking Data transmitting overflow
On Wireless channel is active
CH1 ~ CH4 Blue
Blinking Switching channels
On VGA source is active
VGA Blue
Blinking Switching sources
On Component source is active
Component
(YPbPr)
Blue
Blinking Switching sources
On S-Video source is active
S-Video Blue
Blinking Switching sources
On CV source is active
Composite Blue
Blinking Switching sources