PROLiNK PHA-1001G User Manual

11g wireless lan

Advertising
background image

802.11g Wireless LAN

802.11g Wireless LAN

Access Point and Ethernet Bridge

Access Point and Ethernet Bridge

PHA-1001g

Key Features

Can function as Access Point or Wireless Ethernet

Bridge

Compact size
Accept 6~15 V D.C. directly suitable for vehicle

mounting.

Can be incorporated into different product e.g. weighing

scale, vending machine,surveillance camera and etc.

Wireless Isolation between wireless clients
MAC address Access Control

Wireless Features

•IEEE 802.11g compliant radio, up to 54 Mbps
•RF Power Control. The transmit power can be adjusted by
software control between 100% to 12.5% of maximum

radio power
•Remote Access Point Association Control

•Support seamless roaming within the same subnet
between Access Point (In repeater and client mode)‏

Network (Internet and Intranet)‏

•Protocol filtering

Security and Access Control for Access Point

Mode

•Support static WLAN WEP up to 152 bits encryption
•MAC Address Control

•WPA with Radius Server for EAP-TLS, EAP-TTLS and EAP-

PEAP (In Access Point mode)‏

•WPA-PSK (AES and TKIP) (In Access Point mode)‏

•Wireless to wireless user isolation

Management

•Web-based management
•IP address discovery software (Viper Quick Start)‏

•Firmware upgradeable through web-server and telnet

Hardware

•Antenna connector: 50-Ohm Reverse SMA Female

antenna connector. (For external antenna connection)‏
•Chassis Type: Desktop mounting
•Ethernet Port: One 10/100 Base-T (RJ-45 connector) with

auto MDIX.

Power Specification

•Power adapter: 5~15 V DC

•Power Consumption: Typical 5.0 Watts, 5.5 Watts Max

Environment

•Operating Temperature: 0ºC to 45ºC ambient

temperature

•Relative Humidity When Operational: 20~90% (non-

condensing)‏

•Storage Temperature: -20ºC to +75ºC ambient

temperature

•Relative Humidity during storage: 95% Max (non-

condensing)‏

RF Specification

OFDM, CCK, DQPSK, DBPSK

• Modulation Technique

CSMA/CA with ACK

• Media Access Protocol

50 Ω (for external antenna
connector, if applicable)

• Nominal Antenna Port

Impedance

17dBm ± 2dBm

• Transmitter Output

Power

11 channels (USA/Canada), 13
Channels (Singapore, Europe
except France), 14 Channels
(Japan)‏

• Channels

54, 48, 36, 24, 18, 12, 11, 9, 6,
5.5, 2, 1 Mbps 108Mbps for
Turbo mode

• Wireless Data Rate

2.4 ~ 2.4835 GHz

• Frequency Range

Standard Package

The standard package for AP-1001g comes
with the following

AP-1001 g

2 dBi Antenna

9V 1000mA Power Adaptor

2

3

1

Specification are subject to changes without prior notice due to engineering improvement. Wireless range and performance may vary with environment.

All brands and product names are trademarks or registered trademarks of their respective holders.

PROLiNK Wireless LAN Products

RFNet Wireless LAN Products

www.prolink2u.com

Advertising