PROLiNK PRO2216TW - Manual (Page 24)

OSD
Select to enter the OSD submenu. Press "Up/Down" key on
the remote control or "CH+/CH-" key on the front panel to choose
what you need. Press the "Left/Right" key on the remote control
or the "VOL+/VOL-" key on the front panel to adjust analog value
or state (see below table).
5 0
5 0
1 5
1 0 0
O S D - H P O S I T I O N
O S D - V P O S I T I O N
O S D - D U R AT I O N
O S D - H A L F T O N E
O S D - L A N G U A G E
E N G L I S H
O S D
S E L A D J M E N U E X I T
OSD-H POSITION
OSD-V POSITION
OSD-DURATION
OSD-HALFTONE
Option Function Description
Choose OSD menu display
language
Adjust H-position of OSD menu
Adjust V-position of OSD menu
Adjust duration of OSD menu
Adjust halftone of OSD menu
Increasing analog value, OSD menu move toward right;
Decreasing analog value, OSD menu move toward left (0-100).
There are many languages to select.
Increasing analog value, OSD menu move toward down;
Decreasing analog value, OSD menu move toward up(0-100).
Increasing analog value, extend duration time of OSD menu(5-60).
Increasing analog value increases halftone;
Decreasing analog value decreases halftone(0-100).
OSD LANGUAGE
22