PROLiNK H52201 User Manual User Manual

Page 23

Advertising
background image

PROLiNK Hurricane 5200C/5201

ADSL2+ Modem / Router

User Manual

Page 23 of 59

Field

Description

IP Pool Range

Specify the lowest and highest addresses in the pool.

Max Lease Time

The Lease Time is the amount of time that a network user is allowed to

maintain a network connection to the modem/router using the current

dynamic IP address. At the end of the Lease Time, the lease is either renewed

or a new IP is issued by the DHCP server. The amount of time is in units of

seconds. The default value is 86400 seconds (1 day). The value –1 stands for

infinite lease.

Domain Name

A user-friendly name that refers to the group of hosts (subnet) that will be

assigned addresses from this pool.

Function buttons in this page:

Show Client

The pop-up window will list a table of each connected DHCP client PCs in the local network

(in terms of assigned IP address, MAC address and leased time).

Apply Changes

Set new DHCP server configuration. New parameters will take effect after the setting is saved

into flash memory and the system is rebooted (see section “Admin” for save details).

MAC-Base Assignment

This page is used to assign static IP address based on MAC address. Please enter your

respective MAC address and IP address in the following format:

Host MAC Address

:

xx-xx-xx-xx-xx-xx (e.g. 00-d0-59-c6-12-43)

Assigned IP Address

:

xxx.xxx.xxx.xxx (e.g. 192.168.1.100)

Assign IP

Click on Assign IP button to apply your settings.

Delete Assigned IP

Select an existing entry to be deleted by clicking the radio button at the Select column of

the MAC-Base Assignment Table. Click Delete Assigned IP to delete this entry from

configuration.

Close

Exit from this page.

DHCP Relay Configuration

Some ISPs perform DHCP server function to their customers’ home/small office network.

In this case, you can configure the modem/router to act as a DHCP relay agent. When a

host on your network requests for Internet access, the modem/router contacts your ISP to

obtain the IP configuration, and then forward that information to the host.

Advertising
This manual is related to the following products: