PROLiNK PMO712G - Manual

Version 1.00 (Feb’10) 1
PROLiNK® PMO712G
2.4GHz Wireless Mouse
QUICK INSTALLATION GUIDE
Version 1.00 (Feb’10)
1. INSTALLATION / SETUP
1.1. Plug the Nano receiver into a USB port of your computer.
1.2. Push the Battery Cover Switch aside, open the battery door
and install battery, then close the battery cover.
2. RECEIVER STORAGE AND ON/OFF THE MOUSE
2.1. You can store or take out the Nano receiver from the Nano receiver storage by
push/pull the Nano receiver.
2.2. You can switch ON or SHUT OFF the mouse by use the ON/OFF switch on the
bottom of the mouse.
3. TROUBLESHOOTING
3.1. Check Nano receiver connection; try to insert Nano receiver to another USB port on
your computer.
3.2. Check to see if the batteries in the mouse are installed
English