PROLiNK Hurricane 9000 - Manual (Page 24)

2 4
4.3.10 ADSL Configuration
The ADSL Configuration page allows users to set the configuration
for ADSL protocols...
Trellis: Trellis Code. By default, it is always enabled.
Handshake Protocol: This is for the ADSL handshake protocol.
Wiring Selection: The wiring selection for the RJ-11.
Bit Swapping: Disable by default.
4.3.11 Route Table
The Route Table page displays routing table and allows users to
manually enter the routing entry. The interface br0 means the Ethernet/
USB interface; lo0 means the loopback interface.
Section Four: Web-Based Management